If you have recently installed a weed eater, it might be a little challenging to string it. However, if you understand the basics, you can easily string a weed eater with two holes. The string is one of the most important components of the weed eater, as it doesn’t function without it. Thus, it becomes a necessity to learn how to string a weed eater or weed whacker with two holes to ensure the grass and weeds are properly trimmed.
This blog discusses all you need to know about stringing a weed eater with two holes.
What to Consider Before Stringing a Weed Eater?
Here are some factors to consider before you string a weed eater with two holes -
Select the Right Trimmer Line
Choosing the right trimmer line ensures that the weed eater functions properly and cuts the grass and weeds effectively. You can read the user manual to determine the correct line size for your weed eater model. Some common diameters are 0.095, .080, and 0.065 inches.
Consider the Line Shape
Next, consider the shape of the trimmer line. Most weed eaters have round trimmer lines, whereas others have twisted, square, or serrated lines that get rid of even tougher weeds. It is advisable to choose the line that is compatible with the machine. If you have auto-feed trimmers, try replacing the entire spool. This works better than just changing the string. If the weed eater is worn out, consider replacing them as soon as possible.
Prioritize Safety
Before stringing the weed eater, ensure they are not connected to the power supply. If the machine is battery-powered, consider removing the batteries to avoid any accidents during the process. It is also advisable to let the appliance completely cool down. Moreover, clean the trimmer head when replacing a string using a cloth or brush.
How to String a Two-hole Weed Eater?
If you are new to stringing a two-hole weed eater, the process might seem overwhelming. But with patience and practice, you can easily learn how to string the weed eater. Here are some simple steps to help you get started -
Remove the Cap and Spool
Flip the weed eater upside down to remove the cap and spool of wire. Find the cap underneath the appliance. You might have to either press or unscrew it to remove the cap. If the appliance is too old and it’s difficult to remove the cap, consider applying gentle pressure while twisting it.
After removing the cap, extract the spool from the housing, and make sure to remember its position for proper assembly. Before moving forward, assess the spool for any sign of damage or debris accumulation to ensure it is still in good condition. Once the cap and spool are out, you can remove the old string.
Locate the Starter Hole
When the cap is removed, it is time to load the new string. It is important to measure and cut a length of 20-25 inches of the string, which ensures sufficient line for optimal functioning. Next, fold the string into half, insert the middle section into the starter hole, and pull firmly to secure it.
If you have a two-hole weed eater, repeat the process for the other side as well. Make sure to maintain equal lengths. To prevent tangles and jams, wind the string in a clean and straight row.
Feed Lines Through Eyelets
Start by guiding the ends of strings through the eyelets on the spool and ensure they are inserted from the inside out. Once both the strings are in place, wind them firmly around the spool following the directional indicators. Leave at least 4-6 inches of string extending from each eyelet.
Reattach the Cap
Finally, put the cap back on and make sure it locks properly in position. This ensures the spool and string are firmly in place for the smooth and efficient functioning of the weed eater.
How to Make Trimmer Lines Last Longer?
All trimmer lines wear out due to frequent usage. Another reason for them to wear is - lines spinning too fast. So, here are some expert tips on how you can make the trimmer lines last longer -
Weed-Eating Techniques
Keep the string parallel to the ground when tapping the spool and feeding more lines. This helps avoid contact with rocks and soil, which reduces the potential damage and wear. Also, pay attention to the sound of the string trimmer. Any changes in it can indicate the right time to feed a new string.
Length of the Spool
Always get a bigger string, as spool length can affect the line’s functioning and longevity. Remember, spool lengths are not similar for all the trimmer lines. So, choose wisely.
String Type
Moreover, consider the size, length, and style of the string. As string size is one of the biggest limitations, it is advisable to always refer to the manufacturer’s manual. This ensures the compatibility of the string with your weed eater.
| Some Tips |
Don’t expose the string to direct sunlight, as it can weaken the line. If the weather is too hot, store the string by soaking it in water. This ensures its flexibility and prevents it from becoming brittle.
|
